Nikon LS-4500AF - Appendix: Specifications

51 Nikon Film Scanner LS-4500AF User's Manual
Appendix: Specifications
Film used: Transparent film
Scanning method: Planar scanning, film moving type
Sensor: 5,000 pixel CCD linear sensor
Lamp: 12V 20W Halogen lamp
Color separation: Surface sequence 3-pass method (red, green,
blue optical filter)
Scanning area: 5 x 6 inches (4 x 5 inch optical system) 1.66 x
6 inches (35mm optical system)
Optical resolution: 1,000dpi x 2,000dpi (4 x 5 inch optical system)
3,000dpi x 3,000dpi (35mm optical system)
Interpolation resolution: 2,000dpi x 2,000dpi (4 x 5 inch optical system)
3,000dpi maximum (35mm optical system)
Resolution: From 50dpi to maximum resolution in 1dpi
steps
A/D conversion: 12 bits/color
Dynamic range: 3.0 or more
Output data: Monochrome, dither, full color (8 bits/color, 12
bits/color)
Scanning modes: Fast mode, normal mode, high quality mode
Focus: Auto, manual
Setup: Auto, manual
Sharpness: 3 x 3 matrix can be set by user
Appendix: Specifications