Nikon N80QD - F80 QD Quartz Databack User Manual

AF Area Mode
• Autofocus operation lets you select Single Area AF that uses one focus
area selected
or Dynamic AF that also utilizes the other four focus areas.
Rotate AF Area mode selector to select AF Area mode.
N80 N80QD
C:'l 1,5 ,56 P [ I'
• c:l appears when the Single Area AF is selected and FJ or R ( wh en
Dynamic
AF Mode with Closest Subject Priority is activated) appears when
Dynamic
AF is selected in the LCD panel.
[
]: Single Area AF c:l
With Single Area AF , only the focus brackets selected among five focus
areas is used for autofocus. This mode
is useful for achieving accurate J
focus on a selected focus brackets when shooting a stationary subject.
[+]: Dynamic AF Rln (in Dynamic AF Mode with Closest Subject Priority)
In Dynamic AF , you designate the primary sen sor (the first to detect the
subject), then if the detected subject moves, Dynamic
AF automatically
shifts to the next sensor that detects the subject, then the
ne xt again,
shifting among the progression of sensors
as the subject moves. Dynamic
AF thereby follows and maintains accurate focus even on subjects that
move irregularly.
(LCD panel and viewfinder indications do not change as
sensoring shifts in Dynamic AF mode.) Dynamic AF Mode with Closest
Subject Priority can also be activated
in Dynamic AF mode. See ne xt
page.
If the focus mode
is set to Single Servo AF in Dynamic AF, the camera is
automatically set to Dynamic AF Mode with Closest Subject Priority in initial
setting.
39

Nikon N80QD - F80 QD Quartz Databack Specifications

General

Brand	Nikon
Model	N80QD - F80 QD Quartz Databack
Category	Film Camera
Language	English