62
Auto
Exposure Bracketing-continued
• Rotating the Sub-Command Dial while pressing the Auto Exposure
Bracketing button
Cl!:il
changes the setting
as
follows:
Number
of
shots
and
Bracketing
bar
graphs Bracketing order
compensated
EV
value
3F
0.5
+41.-
0,
-D
.5, +0.5
3F
,n
+4"-
0,
-1.0,
+1
.0
I .U
3F
:.5
+41.-
0,
-1
.5, +1.5
3F
c.O
+41.-
0,
-2
.0, +2.0
+2F 0.5
+41
0, +0.5
+2F
,n
+41
0, +1.0
I.U
+2F
1.5
+41
0, +1.5
+2F 2D
+41
0, +2.0
--2F
0.5
..
-
0,
-0
.5
--2F
,n
1.-
0,
-1
.0
I.U
--2F
:.5
..
-
0,
-1
.5
--2F
2.0
1.-
0,
-2.0
~
3:
Bracketing order can be set to change from negative
EV
value to
positive
EV
value (page
71)
.
3 Compose picture, focus and shoot.
• Compensated shutter speed and aperture values are displayed
dur
ing
shooting.
•
To
cancel the Bracketing, rotate the Main-Command Dial while pressing the
Cl!:il
button so
Iil:tJ
disappears from the LCD panel
or
perform Two-Button
Reset (page 76). The number
of
shots and compensated
EV
values
previously selected will remain when they are canceled with the Main-
Command Dial, and they automatically reset to
"
3F
0.5"
when the Two-
Button Reset is performed.
• If the exposure compensation function (page
60)
or flash exposure
compensation (page
85)
is 'also set, Bracketing will be combined with the
exposure compensation values. It is useful to perform Bracketing with a
compensated value of over
+2
EV
or under
-2
EIJ.
• With film advance mode
in
~
(continuous shooting), fully depress and hold
the shutter release button until the set number
of
shots has been taken and
film advance stops automatically.
• If the end
of
the film roll is reached during Bracketing, the remaining shots
can be taken after new film has been loaded. Also, if you turn the power
switch off during Bracketing, the remaining shots can be taken after the
power is turned back on.
• Bracketing is performed with one frame at a time when the self-timer (page
68)
is set.
To Next Page
Loading...
Need help?
General
