Nikon One-Touch Zoom 90s One-Touch Zoom 90s AF Quartz Date - Shutter FC lens Assembly

FCA54001-R.3567.A
- A1 • One Touch Zoom 90s AF -
2.ASSEMBLY/ADJUSTMENT
Shutter·FC lens
● Mount the shutter 2 to the lens barrel B 1 and tighten the three screws 3.
● Adhere the light baf󲥭e plate 4.
● Mount the lens drive ring 6 to the FC lens 5 and then mount them to the shutter.
②
①
④
⑤
⑥
③×３
Oil: MZ-800S
BF adjustment is necessary.
Adhesive: 1401B
Set the FPC upside.
Fit the groove of the lens barrel B to the
gear of the shutter.
Apply it to the grooves of inside and
to the groove of the RC lens.
After adjustment, apply the adhesive.