Nikon One-Touch Zoom 90s One-Touch Zoom 90s AF Quartz Date - AE Inspection; AF Inspection and Adjustment

FCA54001-R.3567.A
- A19 • One Touch Zoom 90s AF -
AE inspection
● Inspection and adjustment with personal computer
1) Connect a camera to a personal computer.
2) Set the camera onto a shutter tester.
3) Start the inspection/adjustment software and execute AE inspection.
·Carry out inspection according to the display on the personal computer. If a value is out
of standard, replace the AF unit.
Standard: -1.0 ～ +2.0EV
AF inspection and adjustment
● Inspection and adjustment with personal computer
1) Connect a camera to a personal computer.
2) Let the camera face a standard re󲥭ex paper (18%).
3) Start the inspection/adjustment software and execute AF inspection and adjustment.
·Carry out inspection and adjustment according to the display on the personal computer.
Standard:
● Inspection with test mode
·Set the manual test mode for the camera.
1) Set the main switch to “ON”.
2) As keeping the speed light mode switch “ON”, set the 󲥬lm rewind switch to“ON”
and red eye/self switch to “ON” to display AF on LCD.
3) Let the camera face a standard re󲥭ex paper (18%), lightly press the release button at the
Speci󲥬ed distance and check the step number displayed on LCD.
4) When you hope to release the test mode, set the main switch to “OFF”.
Distance (m) Step
３．０２６２ ６～７
２．３５６７ ８～９
１．７８３８ １１～１２
１．２８０２ １６～１７
０．９６９８ ２２～２３
０．７０００ ２９～３０