Nikon One-Touch Zoom 90s One-Touch Zoom 90s AF Quartz Date - Zoom mechanism unit Installation; Speed light unit Installation

FCA54001-R.3567.A
- A10 • One Touch Zoom 90s AF -
Zoom mecahnism unit installation
● Put the zoom mechanism unit 1 into the groove of the body to mount it and tighten the two
screws 2.
Speed light unit installation
● Solder the red wire of the battery terminal and black wire of the terminal SP 2 to the speed
light PCB 1.
①
Guide the wires upward.
②×２
Put the zoom mechanism
unit into the groove.
①
②
If it is dif󲥬cult to put it in,
turn the lens barrel in right and
left and 󲥬t the gear.