Nikon One-Touch Zoom 90s One-Touch Zoom 90s AF Quartz Date - Main barrel Straight guide B Assembly

FCA54001-R.3567.A
- A4 • One Touch Zoom 90s AF -
Main barrel·Lens barrel B
● Fit and insert the lens barrel B 2 into the main barrel 1 and mount it by turning clockwise.
● Move the lens barrel B 2 forward to the TELE side and mount FPC to the main barrel 1.
Straight guide B
● Push in the lens barrel A/B 1 by approx. 5mm and insert the straight guide B 2.
● Fit the hole of the straight guide B 2 to the boss of the lens barrel A/B 1 and tighten
the three screws 3.
①
Set it to “TELE” and pass
FPC through the hole of
the main barrel.
Fit the groove of the main
barrel to the place where
the gear of the lens barrel
B is changed.
②
Fit the boss.
①
②
③×３
Oil: MZ-800S
Apply it to the inside groove.