EasyManua.ls Logo

Nikon One-Touch Zoom 90s One-Touch Zoom 90s AF Quartz Date - Page 56

Nikon One-Touch Zoom 90s One-Touch Zoom 90s AF Quartz Date
57 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
FCA54001-R.3567.A
- R6 • One Touch Zoom 90s AF -
Item Standard of judgment Method and tools
Electric
current
consumption
Ammeter/Power
supply (1)
Use the power
supply (2)
to measure the
operating time.
Zoom Zo W
500mA or less/operating time: 1 second or less
Measure the electric current as pressing the
zoom button.
TYP of electric current consumption is approx.
300mA.
Zoom W T
500mA or less/operating time: 3 seconds or less
Zoom T W
500mA or less/operating time: 3 seconds or less
Zoom W Zo
500mA or less/operating time: 1 second or less
BC voltage
BC warning voltage
Power supply(3)
Visual check
·At 2.45 2.70V, the battery mark must
blink and release must be possible.
Other displayed items must be normal except the
battery mark.
·At 2.40±0.1V, the battery mark must
blink and release must be possible.
This voltage value is standard in a camera and
actual measurement is not possible.
After checking the battery mark on LCD, perform
release.
BC lock voltage
Power supply(3)
Visual check
·At 2.25 2.50V, the battery mark must
blink and release must be impossible.
Others must be turned off except the battery
mark.
·At 2.20±0.1V, the battery mark must
blink and release must be impossible.
This voltage value is standard in a camera and
actual measurement is not possible.
·The BC warning voltage and BC lock voltge
must not be reversed in a same camera. (Elec-
tric potential difference: 0.1V or more)
·At 2.10±0.1V, LCD is turned off.
After checking the battery mark on LCD, perform
release.
Battery life
Film advance quantity ISO100 24EX
Power supply(2)
·Normal temperature: When a 󲥬lm of 24
frames is used, you can take pictures of
15 󲥬lms or more (on the condition that
speed light 50% is used).
·-5°C: When a 󲥬lm of 24 frames is used,
you can take pictures of 3 󲥬lms or more
(on the condition that speed light 50% is
used).
Perform 13 shots of speed light 󲥭ash at inter-
vals of 8 seconds and perform release con-
tinuously in the 󲥭ash prohibition mode till
automatic return occurs.
Carry out zoom operation once every shot.
After rewinding is ended, load the next 󲥬lm car-
tridge at once.

Related product manuals