-BASIC
OPERATION-continued-----------
3
Lock
the
flash
unit
.
coupler
.
Turn
the open/clos
ed
knob
to
th
e
"clo
s
ed
"
po
sition (indicated by a
dot) to lock the flash unit coupler;
make sure the
fla
sh unit and flash
unit coupler fit tightly together.
8
Note:
To
remove the flash unit coupler. sel the
knob to the OPEN position. and while applying
pressure to the knob, gently pull the coupler
off
.
4
Remove
the
Battery
.
Holder
MS·5 @ .
Open the battery chamber lid @
by
sliding
it
in
the direction of the arrow
and remove the battery holder.
Note:
You
may feel slight tension when
re
-
moving or replacing the holder. Th
is
tension.
however. can be ignored.
· 1
To Next Page
Loading...
