Why Nikon Camera Flash SB-800 does not fire?
If your Nikon Camera Flash SB-800 doesn't fire, it might be because the canceling flash firing setting is activated in the Custom settings mode. To resolve this, deactivate the canceling flash firing setting.
What to do if ready-light does not light up on Nikon Camera Flash?
If the ready-light on your Nikon Camera Flash doesn't light up, there are a couple of potential reasons: * The battery power might be weak, in which case you should replace the batteries. * The standby function might be activated. If so, disable the standby function.
Why Nikon Camera Flash SB-800 control buttons do not work?
If the control buttons on your Nikon Camera Flash SB-800 don't work, it's possible that the control buttons are locked. Unlock the control buttons to resolve this issue.
What to do if Nikon SB-800 zoom-head position cannot be adjusted?
If the zoom-head position on your Nikon Camera Flash cannot be adjusted to other than 14mm or 17mm, it could be because the built-in wide-flash adapter is in use, or the Nikon Diffusion Dome is attached. Remove the built-in wide-flash adapter or the Nikon Diffusion Dome.
How to fix Nikon SB-800 Camera Flash shooting distance range not appearing?
If the flash shooting distance range does not appear on your Nikon Camera Flash, the flash head might be adjusted to a position other than the horizontal/front or down -7? position. Adjust the flash head to the correct position.
What to do if Nikon Camera Flash power turns off automatically?
If your Nikon Camera Flash power turns off automatically, the batteries may be extremely exhausted. Try replacing the batteries.
How to fix Nikon SB-800 not turning on?
If your Nikon Camera Flash isn't turning on, it might be due to the batteries not being installed correctly. Check that the batteries are installed correctly.
Why there is no D, or o indicator in TTL auto flash mode on Nikon SB-800 Camera Flash?
If no D, or o indicator appears in TTL auto flash mode on your Nikon Camera Flash, the camera’s exposure mode or metering system is not correctly set, or a non-CPU lens is mounted. Correct the camera’s exposure mode or metering system.
Why Nikon Camera Flash SB-800 makes a strange sound when turned off?
If your Nikon Camera Flash SB-800 makes a strange sound caused by the flash head zooming back and forth even when it's turned off, the batteries are likely extremely exhausted. Replace the batteries.
General| Product color | Black |
|---|---|
| Focal length range | 24 - 105 mm |
| Approx. number of flashes | 150 |
| Approximate recycling time | - s |
| Guide number (ISO 100, set at 35mm zoom) | 38 m |
| Battery type | AA |
| Number of batteries supported | 4 |
Weight and Dimensions| Depth | 91.7 mm |
|---|---|
| Width | 70.6 mm |
| Height | 127.4 mm |
| Weight | 350 g |
To Next Page
