Nikon Speedlight SB-700 User Manual

E–30
Functions
E
Advanced Wireless Lighting ■
When the camera’s depth-of-field preview button is pressed, the •
master flash unit (with the flash function activated) and all other
remote flash units fire as modeling illuminators at the set flash
output value at the selected mode.
SU-4 type wireless multiple  ash-unit photography ■
When the camera’s depth-of-field preview button is pressed, only the •
master flash unit fires as the modeling illuminator.
The remote flash units also fire according to the modeling •
illumination of the master flash unit, but these are not modeling
illuminations.
Standby function
If the SB-700 and camera are not used for
a speci ed time, the standby function is
automatically activated to conserve battery
power.
The standby function is activated when •
the camera’s exposure meter is turned
off (default setting).
The standby activation lead time can be adjusted with the custom •
setting (0B-21).
To cancel standby
Press the camera’s shutter-release button halfway. •
Turn the power switch/wireless mode switch for multiple flash units •
to [ON], [REMOTE] or [MASTER].
Press the test firing button. •

Nikon Speedlight SB-700 Specifications

General

Vari-Power	1/1 to 1/128
Type	Shoe Mount
Color Temperature Information Communication	Yes
LCD Panel	Yes
Guide Number	28 m/92 ft at ISO 100 (35mm)
Zoom Range	24-120mm
Flash Duration	1/1042 sec at full power
Exposure Control	i-TTL
Bounce Head	Yes, -7 to 90 degrees
Swivel Head	Yes, 180 degrees left or right
Power Source	4 x AA batteries
Weight	360 g without batteries
Recycle Time	2.5 sec (NiMH)
Flash Modes	TTL, Manual, Repeating
Wireless Operation	Yes; Commander and Remote modes