Why does dust leak from my Nilfisk-Advance 3156 L Vacuum Cleaner?
Dust leaking from your Nilfisk-Advance Vacuum Cleaner could be due to two primary reasons. First, the filter might be torn; if so, replace it with a filter of identical category. Second, the filter might be inadequate; in that case, replace it with a suitable category filter and check.
Why does my Nilfisk-Advance 3156 L suddenly stop working?
Your Nilfisk-Advance Vacuum Cleaner might stop suddenly due to several reasons. First, the main filter could be clogged; try shaking it, and if that doesn't work, replace it. Second, the suction hose might be blocked; inspect it and clean it thoroughly. Finally, the motor protector might have tripped; in this case, check the setting and the power draw of the motor. If needed, contact an authorized after-sales service center.
How to fix electrostatic current on my Nilfisk-Advance 3156 L Vacuum Cleaner?
If you're experiencing electrostatic current on your Nilfisk-Advance Vacuum Cleaner, it's likely due to non-existent or inefficient earthing. Check all earth connections, paying particular attention to the suction inlet. Also, ensure that the hose being used is strictly antistatic.
General| Model | 3156 L |
|---|---|
| Category | Vacuum Cleaner |
| Power | 1200 W |
| Frequency | 50/60 Hz |
| Airflow | 3600 l/min |
| Type | Wet/Dry |
| Power Source | Electric |
To Next Page