What to do if dust leaks from the Nilfisk-Advance Vacuum Cleaner?
If dust is leaking from your Nilfisk-Advance Vacuum Cleaner, it may be because the filter is torn or inadequate. If the filter is torn, replace it with one of identical type. If the filter is inadequate, replace it with another of a suitable category and check.
Why does my Nilfisk-Advance Vacuum Cleaner increase revolutions?
The revolutions of your Nilfisk-Advance Vacuum Cleaner may increase due to a clogged primary filter or a clogged vacuum hose. If the primary filter is clogged, use the filter shaker (on models with a manual filter shaker). If that's not enough, replace the filter. If the vacuum hose is clogged, check the hose and clean it.
What to do if my Nilfisk-Advance Vacuum Cleaner does not start?
If your Nilfisk-Advance Vacuum Cleaner doesn't start, the issue might be a lack of power supply. Check for power at the socket and inspect the condition of both the socket and the cable. It is advisable to ask a qualified technician to perform the assistance.
Why is there electrostatic current on my Nilfisk-Advance Vacuum Cleaner?
If you are experiencing electrostatic current on your Nilfisk-Advance Vacuum Cleaner, this could be due to non-existent or inefficient grounding. To resolve this, check all ground connections, particularly on the vacuum inlet fitting. You might also need to replace the hose with an antistatic hose.
Why are the motors noisy in my Nilfisk-Advance Vacuum Cleaner?
Noisy motors in your Nilfisk-Advance Vacuum Cleaner are likely due to worn or broken motor brushes (carbon). To fix this, remove and replace the (carbon) motor brushes.
General| Model | S2 L |
|---|---|
| Category | Vacuum Cleaner |
| Power Source | Electric |
| Dust Capacity | 20 liters |
| Tank Capacity | 20 liters |
| Hose Length | 2.5 meters |
| Cord Length | 10 meters |
| Airflow | 3600 liters/min |
| Vacuum Level | 22 kPa |
| Weight | 10 kg |
To Next Page