Nilfisk-Advance S2 L - Technical Specifications

C343
6
09/2017
S2 / S3
GB
Technical specications
EU UK
Parameter Units S2
S3
E-VAC2000
BDC1330
S2 S3
Dust classes L - M - H L - M - H
Voltage (50 - 60 Hz) V 230 110 230 110 230
Power rating kW 2 3 2 2 3 3
Power rating (EN 60335-2-69) kW 1.8 2.6 1,5 1,8 2,2 2,6
Max vacuum hPa
(2)
211 211 165 211 165 211
Maximum air ow rate(without hose and reductions) L/min’ 5500 8100 4980 5500 7080 8100
Maximum air ow rate (with hose, length: 3 m,
diameter: 50 mm)
L/min’ 4720 6500 4470 4720 5950 6500
Noise level (Lpf) (EN60335-2-69) dB(A) 70 71 70 71
Protection IP 44 44
Insulation Class I I
Inlet (diameter) mm 70 70
Hoses allowed for classes “L” and “standard”
(diameter)
mm 70 70
Hoses allowed for classes “M” and “H” (diameter) mm 50 50
Primary lter surface for classes “L” and “M” m
2
1.95 1.95 1.95 1.95
Upstream absolute “H” lter surface m
2
3.5 3.5 3.5 3.5
Absolute lter e󰀩ciency (EN 1822) % 99.995 (H14) 99.995 (H14) 99.995 (H14) 99.995 (H14)
Model Units S2
S3
E-VAC2000
BDC1330
Container capacity L 40 50 100
Dust bag capacity (versions M - H) L 32 32
“L version” mass
(1)
kg 62 68 71
“M” version mass
(1)
kg 64 70 73
“H version” mass
(1)
kg 67 73 76
Dimensions
Figure 4
Model
S2 L - M - H
(40 L)
S3 L - M - H
BDC1330
(50 L)
S3 L - M - H
E-VAC2000
BDC1330
(100 L)
A (mm) 800 800 800
B (mm) 600 600 600
C (mm) 1230 1300 1580
(1) Net weight (2) hPa = mbar
■ Storage conditions:
T : -10°C ÷ +40°C
Humidity: 85%
■ Operating conditions:
Maximum altitude: 800 m
(Up to 2,000 m with reduced performances)
T : -10°C ÷ +40°C
Humidity: 85%