Why does dust leak from my Nilfisk-Advance Vacuum Cleaner?
Dust leakage from your Nilfisk-Advance Vacuum Cleaner can occur if the filter is torn. Replace it with an identical one. Alternatively, the filter might be inadequate; replace it with a suitable category filter and check.
Why does my Nilfisk-Advance Vacuum Cleaner suddenly stop?
Your Nilfisk-Advance Vacuum Cleaner might suddenly stop due to several reasons. First, a clogged primary filter could be the culprit; try shaking the filter or replacing it if necessary. Second, check the vacuum hose for any clogs and clean it thoroughly. Lastly, the circuit breaker might have been activated.
What to do if there is electrostatic current on the Nilfisk-Advance Vacuum Cleaner?
If you're experiencing electrostatic current on your Nilfisk-Advance Vacuum Cleaner, it's likely due to non-existent or inefficient grounding. Check all ground connections, especially the inlet.
General| Model | CTS22 |
|---|---|
| Category | Vacuum Cleaner |
| Power | 1200 W |
| Tank Capacity | 22 L |
| Hose Length | 2.5 m |
| Cord Length | 10 m |
| Frequency | 50 Hz |
| Vacuum | 22 kPa |
To Next Page