What to do if dust leaks from Nilfisk-Advance Vacuum Cleaner?
If dust leaks from your Nilfisk-Advance Vacuum Cleaner, it might be because the filter is torn. Replace it with an identical one. Alternatively, the filter might be inadequate. In this case, replace it with a suitable category filter and check again.
Why does my Nilfisk-Advance Vacuum Cleaner suddenly stop?
If your Nilfisk-Advance Vacuum Cleaner suddenly stops, it could be due to a clogged primary filter. Try shaking the filter and replace it if needed. Another possible cause is a clogged vacuum hose, so check and clean it. Also, check the circuit breaker setting and the motor's electrical input. If problems persist, it's best to contact an authorized after-sales service center.
Why is there electrostatic current on my Nilfisk-Advance Vacuum Cleaner?
If you are experiencing electrostatic current on your Nilfisk-Advance Vacuum Cleaner, it is likely due to non-existent or inefficient grounding. Check all ground connections, especially the inlet.
Essential precautions for safe operation and user competence.
Defines acceptable applications for the vacuum cleaner.
Lists strictly forbidden uses of the vacuum cleaner.
Instructions for connecting the vacuum cleaner to the power supply safely.
Overview of built-in safety features and their functions.
Step-by-step instructions for starting the vacuum cleaner.
How to perform an emergency stop of the vacuum cleaner.
Procedures for replacing hazardous dust containers by trained personnel.
Instructions for replacing safe bags in Class H vacuum cleaners.
Procedures for cleaning and decontaminating the vacuum cleaner.
Method for disassembling and replacing primary and absolute filters.
Detailed steps for replacing the primary filter.
General| Model | CTS22 Series |
|---|---|
| Category | Vacuum Cleaner |
| Type | Industrial |
| Tank Capacity | 22 l |
| Cord Length | 10 meters |
To Next Page