Nilfisk-Advance CTS22 Series - Technical Specifications; Dimensions

C313
8
07/2018
CTS22 / CTS22 L-M-H / CTS40 L-M-H / CTT40 L-M-H / CTT40 IECEx
GB
Technical specications
Parameter Units
CTT40
L,M,H
CTT40 IEC-EX
L M-H
Frequency Hz 50 50 60
Voltage V 400 230/400
220/380
400
Power rating kW 4
Power rating (EN 60335-2-69) (50 Hz) kW 3,4
Noise level (L
pA
) (***) dB(A) 71
Protection IP 55 65
Insulation Classe F
Container capacity L 50-100 50 50-100
Inlet (diameter) mm 70
Vibration, a
h
(**) m/s
2
≤2,5
Max vacuum hPa - mbar 180 - 180
Max vacuum with limiting valve hPa - mbar / 160-160
Maximum air ow rate(without hose and reductions) m
3
/h - L/min’ 534 - 8.900
Maximum air ow rate (with hose, length: 3 m, diameter: 50 mm) m
3
/h - L/min’ 355 - 5.915
Hoses allowed for “L” and “standard” classes (diameter) mm 70/50
Hoses allowed for “M” and “H” classes (diameter) mm 50 -
Main lter surface for “standard”, “L” and “M” classes m
2
1,95 1,95
Upstream absolute “H” lter surface - HEPA 14 according to
MPPS method (EN 1882)
m
2
2,4 2,4
Downstream “ULPA 15” absolute lter surface m
2
1,1 -
“Version standard, L and M” weight kg 119 193
“Version H” weight kg 124 198
(*) Only for non-ATEX use
(**) Valore totale di emissione della vibrazione a cui sono sottoposti il braccio e la mano dell’operatore
(***) Incertezza di misura KpA <1,5 dB(A). I valori di emissione sono stati misurati in accordo alla EN 60335-2-69
Dimensions
Figura 4
Model CTT40 L-M-H CTT40 IEC-EX
A (mm) 1.050 1.050
B (mm) 600 600
C (mm) 1.250 1.250
■ Storage conditions:
T : -10°C ÷ +40°C
Humidity: 85%
■ Operating conditions:
Maximum altitude: 800 m
(Up to 2.000 m with reduced performances)
T : -10°C ÷ +40°C
Humidity: 85%