EasyManuals Logo

Nilfisk-Advance CTS22 User Manual

Nilfisk-Advance CTS22
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #31 background imageLoading...
Page #31 background image
C313
14
01/2015
CTS22 / CTS22 L-M-H / CTS40 L-M-H / CTT40 L-M-H / BDC40 H
GB
Translation of original instructions
Troubleshooting
Problem Cause Remedy
The vacuum cleaner suddenly stops
Clogged primary lter Shake the lter. Replace it if necessary
Clogged vacuum hose Check the vacuum hose and clean it.
Circuit breaker activation
Check the setting.
Check the motor electrical input. Contact
an authorized after-sales service centre if
necessary.
Dust leaks from the vacuum cleaner
The lter is torn Replace it with another of identical type.
Inadequate lter
Replace it with another of a suitable
category and check.
The vacuum cleaner blows instead
of vacuuming
Incorrect connection to the electrical
mains
Ask for assistance from qualied
personnel to perform the correct phase
connection.
See page 8, Starting up chapter
Electrostatic current on the vacuum
cleaner
Non existent or inefcient grounding
Check all ground connections. Especially
check the inlet.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Nilfisk-Advance CTS22 and is the answer not in the manual?

Nilfisk-Advance CTS22 Specifications

General IconGeneral
BrandNilfisk-Advance
ModelCTS22
CategoryVacuum Cleaner
LanguageEnglish

Related product manuals