Nilfisk-Advance CTS22 User Manual

CTS22 / CTS22 L-M-H / CTS40 L-M-H / CTT40 L-M-H / BDC40 H
01/2015
7
C313
GB
Translation of original instructions
Technical specications
Parameter Units CTS22
CTS22
L, M, H
CTS40
L, M, H
BDC40 H
CTT40
L, M, H
Voltage (50 Hz) V 400 400 400
Power rating kW 2.2 4 4
Power rating (EN 60335-2-69) (50 Hz) kW 2.1 2.7 3.4
Noise level dB(A) 68 70 73
Protection IP 55 55 55
Insulation Class F F F
Container capacity L 50 50 50
Inlet (diameter) mm 70 70 70
Max vacuum hPa - mbar 300 - 300 / 180 - 180
Max vacuum with limiting valve hPa - mbar / 210 - 210 230 - 230 /
Maximum air ow rate(without hose and reductions) m
3
/h - L/min’ 318 - 5,300 420 - 7,000 534 - 8,900
Maximum air ow rate (with hose, length: 3 m, diameter: 50 mm) m
3
/h - L/min’ 235 - 3,915 280 - 4,670 355 - 5,915
Hoses allowed for “L” and “standard” classes (diameter) mm 70
(*)
/50 70
(*)
/50 70/50
Hoses allowed for “M” and “H” classes (diameter) mm / 50 50 50
Main lter surface for “standard”, “L” and “M” classes m
2
1.95 1.95 1.95
Upstream absolute “H” lter surface - HEPA 14 according to MPPS
method (EN 1882)
m
2
2.4 2.4 2.4
Downstream “ULPA 15” absolute lter surface m
2
1.1 1.1 1.1
“Version standard, L and M” weight kg 100 114 119
“Version H” weight kg 105 119 124
(*) Only for non-ATEX use
Dimensions
Figure 4
Model
CTS22
CTS22 L-M-H
CTS40 L-M-H
BDC40 H
CTT40 L-M-H
A (mm) 1,050 1,050 1,050
B (mm) 600 600 600
C (mm) 1,250 1,250 1,250
(1) Net weight
■ Storage conditions:
T : -10°C ÷ +40°C
Humidity: 85%
■ Operating conditions:
Maximum altitude: 800 m
(Up to 2,000 m with reduced performances)
T : -10°C ÷ +40°C
Humidity: 85%

Nilfisk-Advance CTS22 Specifications

General

Brand	Nilfisk-Advance
Model	CTS22
Category	Vacuum Cleaner
Language	English