Nilfisk-ALTO ATTIX 30 Service Manual

27
27
Testing water level control
(XtremeClean machines only)
1. Remove hose from connection
(Fig.1)
2. Run machine for 20 seconds
3. Blow into the hose (Fig.2)
4. IF the yellow LED starts flashing
(Fig.3) and the machine stops
Fig. 1
Fig. 2
Fig. 3
Nilfisk
ALTO
E
Troubleshooting

Nilfisk-ALTO ATTIX 30 Specifications

General

Category	Vacuum Cleaner
Tank Capacity	30 l
Airflow	3700 l/min
Vacuum Pressure	250 mbar
Hose Length	2.5 m
Dimensions	450 x 380 x 595 mm
Model	ATTIX 30
Mains connection	230 V, 50-60 Hz
Cable Length	7.5 m