Need help?Do you have a question about the Nilfisk-ALTO NEPTUNE 3 and is the answer not in the manual?
General| Voltage | 230 V |
|---|---|
| Frequency | 50 Hz |
| Max. inlet temperature (°C) | 40°C |
| Pump (RPM) | 1450 RPM |
| Water Flow | 600 l/h |
Explains symbols used for safety warnings, precautions, and tips for safe operation.
Covers user safety, warnings about misuse, and protective gear requirements.
Recommendations for securing the cleaner during transport to prevent movement and damage.
Essential checks and safety considerations before starting the cleaner for the first time.
Details the professional applications and intended purpose of the high-pressure cleaner.
Identifies and explains the main operating elements and parts of the cleaner.
Describes the safety devices integrated into the machine for protection.
Steps for setting up the cleaner, including altitude adjustments and burner settings.
Instructions on how to set the brake for stability before operation.
Guide for attaching the crank handle to the high-pressure hose reel.
Steps to fit the clamp for the high-pressure jet tube onto the sliding guard.
Procedure for filling the detergent tank with the recommended cleaning agent.
Instructions for adding Alto AntiStone to the reservoir for scale prevention.
How to adjust the antiscale dosing system based on water hardness testing.
Guide on filling the fuel tank with correct fuel types and storage advice.
Steps to connect the high-pressure hose to the machine's axle nipple.
How to connect the water supply hose, including notes on water quality and filters.
Instructions for connecting the power cord, including voltage verification.
Procedure for applying antifreeze for frost protection before initial use.
How to attach the spray lance to the spray gun securely.
Steps to start the cleaner in cold water or hot water (up to 100°C) modes.
Procedure for starting and operating the cleaner in steam mode (over 100°C).
How to regulate pressure by turning the twist grip on the Tornado Lance.
How to adjust water volume using the twist grip on the VarioPress Gun.
Steps for setting detergent concentration and applying it to surfaces.
Basic techniques for efficient cleaning including soaking, detergents, and pressure.
Methods for cleaning stables, pig pens, and machinery in agricultural environments.
Methods for cleaning vehicle exteriors, engines, and undercarriages.
Techniques for cleaning general surfaces, metallic equipment, and rust removal.
Safe steps to turn off the machine and release system pressure.
Procedure for disconnecting water hoses and the electrical plug.
Instructions for winding up the electrical cord and storing the spray lance.
Steps for protecting the cleaner from freezing temperatures using antifreeze.
Overview of maintenance tasks required at different intervals (weekly, 50h, 6 months).
How to clean or replace water filters located at the water inlet.
Procedure for cleaning or replacing the oil filter component.
Instructions on how to check the pump oil condition and top up if needed.
Detailed steps for draining old oil and refilling with new oil.
Guide for removing and cleaning the flame sensor for proper burner operation.
Explains what each indicator light signifies and the corresponding remedy.
Addresses issues like machine not starting, low pressure, noise, and burner problems.
Guidelines for environmentally responsible recycling and disposal of the cleaner.
Information regarding the product guarantee and its validity.
Detailed technical data including voltage, pressure, flow rates, and dimensions.
Official statement confirming compliance with relevant EU directives and harmonized standards.
To Next Page
