F
SM_POSEIDON 4_en_Ver.1.0_08.2012
Service / Repair
26
Fig.F.34: Piston guide with extractor Fig.F.33: Piston guide removal
Piston Guides And Seals
•If the piston guides can`t be removed by
hand, use an internal extractor as shown,
(Bahco 4521N-F).
•Beware not to damage the guides.
Fig.F.35: Piston guide Fig.F.36: Seals and piston guide
•Note the position of the internal extractor.
•Replace the complete piston seal kit.
•Grease the seals and o-rings lightly before
assembly.
•Assemble in correct order.
•Check the piston guides for wear and
replace if necessary to extend the lifetime
of the new seals.
To Next Page
Loading...
Need help?
General
