Nilox EVO MM93 - Operating Instructions; Charging and Battery Installation

9
OPERATING INSTRUCTIONS
CHARGE
Turn on the video camera and check battery status; if low, charge it.
Either a computer USB port of power adapter (not included) can be used to charge it.
When ECO is charged in off status, the red status led will flash slowly. When finished charging, the
red led will remain on.
The charge process inhibits video camera operations.
BATTERY INSTALLATION
Before inserting the battery, make sure the lock/release button is open; fully insert the battery in
the compartment and close using the lock/release button.
TFT DISPLAY INSTALLATION
EVO MM93
comes with a 2" removable TFT screen to
view saved photos and videos.
Install the display as illustrated.
.