Ninja BL685 User Manual

Assembly and Use of the Processor Bowl - cont.
USE
CHOPPING BLADE
ASSEMBLY
REMOVAL USE
DOUGH BLADE
ASSEMBLY
~
Fig. 1 Fig.2 Fig. 3 Fig. 5
USING THE CHOPPING BLADE ASSEMBLY USING THE DOUGH BLADE ASSEMBLY
Review warning and caution statements on page 8 before 1 Review warning and caution statements on page 8 before
proceeding to number 2. proceeding to number 2.
2 Place the motor base on a clean, dry, level surface such 2 Place the motor base on a clean, dry, level surface such
as a counter or table top. as a counter or table top.
3
Secure the bowl onto the motor base.
3
Secure the bowl onto the motor base.
4 Holding the Chopping Blade Assembly by the shaft, place 4 Holding the Dough Blade Assembly by the shaft, place
it onto the gear shaft inside the bowl. Ensure that the it onto the gear shaft inside the bowl. Ensure that the
Chopping Blade Assembly fits around the gear shaft and Dough Blade Assembly fits around the gear shaft and
that it is standing straight. (Fig. 1) that it is standing straight. (Fig. 5)
5
Add the ingredients and secure the bowl lid onto the
5
Add the ingredients and secure the bowl lid onto the
bowl. bowl.
6
Plug the power cord into the electrical outlet and press
6
Plug the power cord into the electrical outlet and press
on the power button (6). on the power button (6). Select speed button 1 on the
7 Select the speed that best suits your needs. Pulse
control panel and process until ingredients come together
ingredients evenly by pressing down in short intervals.
to form a mass.
NOTE: Please refer to "Speed Settings & Uses" chart for
NOTE: Please refer to "Speed Settings & Uses" chart for
suggested uses and speeds.
suggested uses and speeds.
8
When you have reached your desired consistency, stop
7 Once finished making dough, stop the appliance by
the appliance by pressing the power button (6) and wait
pressing the power button (6) and wait for the blade
for the blade to stop turning.
assembly to stop turning.
9
To remove the lid, pull the lid handle up to a go
0
8
To remove the lid, pull the lid handle up to a go
0
angle and lift the lid off. (Fig. 2) Turn the bowl
angle and lift the lid off. (Fig. 2) Turn the bowl
counterclockwise and then lift off the base. (Fig. 3)
counterclockwise and then lift off the base. (Fig. 3)
10 To release the motor base from the counter or table top,
9
To release the motor base from the counter or table top,
place your hands underneath both sides of the motor
place your hands underneath both sides of the motor
base and gently pull the unit up and towards you. (Fig. 4)
base and gently pull the unit up and towards you. (Fig. 4)
9 I B? 1-877-646-5288
I BL685_Series_lB_ 170428_press.indd 1 o
2017-05-01 9:08
AM I
Case 2:23-cv-02144 Document 1-1 Filed 03/20/23 Page 10 of 16 PageID #: 21

Ninja BL685 Specifications

General

Brand	Ninja
Model	BL685
Category	Blender
Language	English