Ninja BL700 - Page 8

7
1-877-646-5288
Using the Ninja
®
Kitchen System 1200
™
- cont'd
Fig. 5
Fig. 6
5 Select the button that best suites your needs.
NOTE: Please refer to “Speed Settings & Uses” chart
for suggested uses and speeds.
6 Press the power button (
) or the selected button a
second time to stop the attachment from turning or
press a different button to change the speed.
7 When you have reached your desired consistency, stop
the appliance by pressing the power button (
) and
wait for the attachment to stop turning. Then remove
the lid by pressing the release button, lifting the handle
up and pulling straight up. (Fig. 6)
CAUTION: Never insert your hands in the
pitcher as the blades are sharp. Always use a
spatula to dislodge food that has stuck to the
sides of the pitcher.
3 Place the color co-ordinated lid onto the corresponding
container with the locking handle in the upright
position and the pouring spout on the corner opposite
the container’s handle. Align the arrows (
) located
on the lid and container’s handle. Ensure that the lid
is completely seated and press the lid down into the
container. Press the locking handle down so that the
latches on the lid fit under the tabs on the container.
(Fig. 5)
NOTE: If you need to add additional ingredients while
the appliance is processing, open the pouring spout cap
and pour the ingredients in through the opening.
4 Plug the power cord into the electrical outlet and press
on the power button (
).
IMPORTANT: As a safety feature, the power
button (
) will flash and the motor will not work
if the container and lid are not installed correctly.
When the container and lid are installed properly,
the power button ( ) will be solid, indicating that
the appliance is ready for use.
WARNING: Never leave the appliance unattended while in use.
CAUTION: Handle the blade assemblies with care, as the blades are very sharp.
IMPORTANT: Make sure that the motor base is plugged in for use.