9
1-877-646-5288
Using the Master Prep
®
Bowl
CAUTION: Blades are sharp! Use extreme caution when
handling the blades. Always hold them by the shaft.
IMPORTANT: Never run the appliance empty.
1 Place the Master Prep
®
bowl on a clean, dry, level
surface.
2 Holding the lower blade by the shaft, place it over the
spindle pin inside the Master Prep
®
bowl. (Fig. 5)
3 Carefully insert the upper blade over the lower blade
rotating it until it locks onto the lower blade. (Fig. 6)
IMPORTANT: Always assemble the blades inside the
container.
WARNING: DO NOT try to place the blades onto the
power head and then into the Master Prep
®
bowl.
4 Place the food that you want to process into the Master
Prep
®
bowl.
IMPORTANT: Never add ingredients into the Master
Prep
®
bowl before placing the blade assembly in first.
NOTE: DO NOT add more than 450 ml dry or 230 ml
liquid ingredients as this will strain the motor and may
cause overflow.
Fig. 5 Fig. 6
Shaft
To Next Page
Loading...
