Ninja Master Prep QB900 series - Using the Master Prep Pitcher

7
1-877-646-5288
WARNING: DO NOT try to place the blade onto the
power head and then into the Master Prep
®
Pitcher.
Using the Master Prep
®
Pitcher
CAUTION: Blades are sharp! Use extreme caution
when handling the blades. Always hold them by the
shaft.
IMPORTANT: Never run the appliance empty.
1 Place the Master Prep
®
Pitcher on a clean, dry, level
surface.
2 Holding the blade by the shaft, place it onto the spindle
pin inside the Master Prep
®
Pitcher.
 • UsetheNinja
®
4-Blade in the 1.5 L Pitcher. (Fig. 1)
IMPORTANT: Place blade inside the container carefully
as blades are sharp.
Shaft
Fig. 1
Fig. 2