10
➀
Contact End - Insert into Meter with Contacts
(metallic blocks) facing up before adding sample.
➁ Sample Tip - Touch sample (blood or Glucose
Control) to edge of Tip.
Placement of Sample to Test Strip
Correct Incorrect
• Allow sample (blood or Glucose
Control drop) to be drawn into
Sample Tip.
Note: Do not apply blood or Glucose
Control to top of Test Strip.
• Do not smear or scrape drop with Strip.
• Do not apply more sample to Strip
after removing from drop.
Note: Do not insert Sample Tip with
sample into Meter for testing.
Test Strip
1 2
Front of Test Strip
Contacts
Face Up
TB_OB_GutsENG_H4IAU03.qxd:TT_OB_GutsENG.qxd 10/13/10 12:32 PM Page 10
To Next Page
Loading...
