22
5. Wait until Drop Symbol appears in Display.
6. Lance fingertip or forearm. Allow drop to
form.
7. With Strip still in Meter, touch
edge of Sample Tip to blood
drop and hold. Allow blood to
be drawn into Strip until Meter
beeps.
Note: If Meter did not beep or begin countdown
soon after touching blood drop to Sample
Tip, discard Strip. Repeat test with new
Strip and new blood drop. If problem
persists, see Troubleshooting.
8. After countdown, result is displayed with date
and time. Remove Strip and discard. Result is
stored in Memory. Meter turns off.
9. Record result in log book.
Note: Used Strips and lancets are considered
biohazardous. Dispose used Strips and
lancets in approved biohazard container.
or
TB_OB_GutsENG_H4IAU03.qxd:TT_OB_GutsENG.qxd 10/13/10 12:33 PM Page 22
To Next Page
Loading...
