10
① Contact End -
Insert into Test Port with contact
blocks facing up
.
② Sample Tip -
Bring Tip of test strip to top of sam-
ple drop (blood or control solution) aer Drop
Symbol appears in the Display.
Note: Insert test strip into meter before touching Sample
Tip to blood or control solution drop.
Sample Placement
Correct Incorrect
• Allow sample drop to be drawn into Sample Tip until test-
ing begins (meter beeps and dashes move across Display).
• Do not smear or scrape drop with test strip.
• Do not apply more sample to test strip aer testing begins.
• Do not apply blood or control solution to top of test strip.
Do not insert Sample Tip with sample into Test Port.
May damage meter.
Test Strip
12
Top of Test Strip
TMX_OB_GutsENG_RE4NPD03r6.indd 10 7/15/15 3:37 PM
To Next Page
Loading...
