NIPRO Diagnostics TRUE METRIX - Getting Started and Quality Control

Getting Started
Meter comes with pre-set time and date. e
Event Tag feature, Ketone Test Alert, and all Test
Reminders are o. Before using the meter for the
rst time or aer a battery change, check the time,
date, Event Tags, Alert and Reminders, and update
as needed (see Meter Set Up).
e meter turns on when a test strip is inserted into
the Test Port or when “ • ” Button is pressed (see
Memory and Meter Set Up).
Meter turns o when the test strip is released or
removed from the meter, “ • ” Button is pressed, or
aer 2 minutes of non-use.
Turning the Ketone Test Alert on sets a reminder to
check your ketones per your treatment plan when a
blood glucose result is over 240 mg/dL.
Test Reminders are set like an alarm clock to sound
a tone for 10 seconds to remind you to test. Up to
four Test Reminders per day may be set.
13
TMX_OB_GutsENG_RE4NPD03r6.indd 13 7/15/15 3:37 PM