22
Wiegand
Decides whether or not to use Wiegand communication protocol to
send authentication results and user ID to a server.
Function Mode (Time and Attendance mode)
Time and attendance mode; the user must press a function key and
perform the user authentication process when opening the door. The
entry logs will be sent with the function key data to the server
management program.
Depending on the function key, user attendance records can be
classified into the following: “Coming to work”, “Leaving work”,
“Going out”, and “Returning” enabling efficient attendance
management.
Auth Mode
NL: Network mode. In this mode, the terminal connects to Access
Server Professional
TM
via TCP/IP network.
SO: Standalone mode. The terminal works standalone without
Access Server Professional
TM
.
Time Setting
Adjust to set the time on the device.
Terminal Mode (wiegand output)
You can choose to select Wiegand output.
When ‘Reader’ is selected, Wiegand output will be the RF card
number. When ‘Terminal’ is selected, Wiegand output will be
Facility code and User ID.
To Next Page
Loading...
