33
To use 1:N authentication in attendance mode, enter the
attendance key and perform authentication without inputting an ID.
Using Extended Attendance
Mode (Not available)
In Extended Attendance Mode, the
initial main screen will be displayed
as shown on the left.
1. Select a function key, and press
arrow keys to change function
number.
2. Enter the user ID and press
“Enter” to authenticate.
Changing User Information
The administrator can change the passwords, fingerprints, and card
information of registered users using the terminal’s Administrator
menu or the server program. To change user information, contact the
administrator.
To Next Page
Loading...
