Nobles 1002564 - 1016 Power Eagle

Questions and Answers

S
ssteeleAug 1, 2025
What to do if my Nobles 1002564 - 1016 Power Eagle has uneven or no spray?
- T
  teresakingAug 1, 2025
  If your Nobles Floor Machine has uneven or no spray, check the following: * Refill the solution tank if it's low or empty. * Clean or replace dirty or plugged spray tips and screens. * Replace spray tips if they are worn or have an improper size or spray angle. * Clean the solution tank filter if it's plugged. * Reroute or replace pinched or kinked internal solution hoses.
C
Christina GilmoreAug 7, 2025
What to do if the solution pump on my Nobles 1002564 - 1016 Power Eagle does not operate?
- M
  michellehillAug 7, 2025
  If the solution pump on your Nobles Floor Machine isn't working, it may have overheated. Determine the cause and wait 20 minutes for the pump to cool down.
J
Jennifer EspinozaAug 13, 2025
What to do if my Nobles Floor Machine has poor pick up?
- A
  Aaron JohnsonAug 13, 2025
  If your Nobles Floor Machine isn't picking up properly, here are some potential causes and solutions: * If the float shut-off screen is activated, drain the recovery tank. * Ensure the drain hose plug is securely capped. * If the float shut-off screen is clogged, remove the recovery dome and clean it. * Tighten the recovery dome knobs or replace the gaskets if there's air leakage. * Secure any loose vacuum hose connections and cuffs. Replace the vacuum hose if it's defective. * Repair or replace damaged, loose, or missing pickup head shoes. * Try slowing down the cleaning process, as pulling the machine too fast can cause poor pick up.
S
Steven GuerraAug 19, 2025
Why is my Nobles 1002564 - 1016 Power Eagle brush motor not working?
- V
  Veronica BlackAug 19, 2025
  The brush motor on your Nobles Floor Machine might not be working for several reasons: * Ensure the Brush/Spray button is pushed. * If the brush motor circuit breaker tripped, remove any obstruction from the brush or readjust the brush height and then reset the breaker button located at the bottom of the switch box.
R
Roger WebbAug 26, 2025
Why vacuum motor does not operate on Nobles Floor Machine?
- G
  Gabriel ColemanAug 26, 2025
  If the vacuum motor on your Nobles Floor Machine isn't working, the vacuum motor thermal overload might have tripped. Check the airflow for any obstructions and allow 20 minutes for the motor to cool down.