Nobles SPEED SCRUB 1033583

Questions and Answers

S
Sean MillerAug 1, 2025
Why Nobles SPEED SCRUB 1033583 will not operate?
- D
  dortegaAug 1, 2025
  Your Nobles Floor Machine might not be working due to several reasons: the triggers may not be pulled (pull them), the emergency-stop button might be activated (turn it clockwise to reset), the batteries could be discharged (charge them), the batteries might be faulty (replace them), the battery cable could be loose (tighten it), or the main fuse might be blown (replace it). If you have a Drive model, a machine fault may have been detected; in this case, refer to the Battery Meter LED Fault Codes.
M
Michael CarrollAug 6, 2025
What to do if brush motor will not operate in Nobles SPEED SCRUB 1033583 Floor Machine?
- A
  Andrew MooreAug 6, 2025
  If the brush motor on your Nobles Floor Machine isn't working, first check if the scrub head is lowered to the floor; if not, lower it. Also, the battery meter lockout may be activated, so try recharging the batteries. Additionally, the brush motor circuit breaker might have tripped; if so, reset it by pressing the brush circuit breaker button. If you have a 24” Dual Disk model, check if the belt is broken or loose and replace it if necessary.
A
Alexander HolmesAug 13, 2025
What to do if vacuum motor will not operate in Nobles SPEED SCRUB 1033583 Floor Machine?
- K
  Kathy SmithAug 13, 2025
  If the vacuum motor isn't running on your Nobles Floor Machine, ensure the squeegee is lowered to the floor. Also, check if the vacuum motor fuse has blown and replace it with a 25 Amp fuse if needed.
H
hollyfitzgeraldAug 19, 2025
What to do if Nobles SPEED SCRUB 1033583 does not propel (Drive model)?
- S
  silvaandreaAug 19, 2025
  If your Nobles Floor Machine (Drive model) isn't moving, the main fuse might be blown. Try replacing it with a 30 Amp fuse.
S
stevencoxAug 25, 2025
What to do if on-board battery charger will not operate in Nobles SPEED SCRUB 1033583 Floor Machine?
- Z
  zbaileyAug 26, 2025
  If the on-board battery charger isn't working on your Nobles Floor Machine, first, check the plug connection to the power supply. If that's not the issue, the power supply cord might be faulty, so replace the cord.