Nobles Speedshine 1700LS

Questions and Answers

J
Joshua McguireAug 11, 2025
What to do if my Nobles Floor Machine does not operate?
- M
  Mrs. Brittany Browning MDAug 11, 2025
  If your Nobles Floor Machine isn't working, here are a few things you can check: First, look for a tripped circuit breaker, both on the machine and in the building, and reset them if necessary. If the issue persists, there may be a faulty power cord, machine wiring, ON/OFF twist grip switch, motor, a burned-out capacitor (single-speed models), or a burned-out rectifier (dual-speed models). In these cases, it's best to contact a service center for assistance.
J
Jon PatelAug 21, 2025
Why does the circuit breaker on my Nobles Floor Machine keep tripping?
- R
  Renee RiveraAug 21, 2025
  If the circuit breaker on your Nobles Floor Machine is tripping repeatedly, the issue could be due to a heavily soiled pad or brush. Try cleaning or replacing the pad or brush. Also, ensure you are using the correct pad or brush for the application. If problems persist, it is recommended to contact a service center, as the circuit breaker may be defective or the carbon brushes in the motor may be worn.
J
jeremylewisSep 1, 2025
How to fix a Nobles Floor Machine that operates with a wobble?
- S
  sethcarneySep 1, 2025
  If your Nobles Floor Machine is wobbling or moving jerkily, the issue might be with the pad or brush. Try these steps: * Replace the pad if it's soiled. * Ensure you're using the correct pad or brush for the task. * Check that the pad driver or brush is correctly installed; remove and reinstall it if necessary. * Replace the pad or brush if it's unevenly worn. * Make sure the pad is centered on the pad driver; remove and reinstall if needed.