Nobles SS2001E - User Manual

Questions and Answers

A
Angela MaddenAug 10, 2025
What to do if Nobles SS2001E Floor Machine squeegee not picking up?
- A
  Alexandra WatersAug 11, 2025
  If the squeegee on your Nobles Floor Machine isn't picking up properly, start by emptying the recovery tank if it's full. Next, check the ball float shutoff screen inside the recovery tank for any clogs and clean it. Ensure the squeegee is free from debris; clean it if necessary. Replace the squeegee blades if they are worn out. Tighten the squeegee thumbscrews and make sure the vacuum hose connections are secure and free of holes. Clear any debris from the vacuum hose. Replace the tank gasket if it's defective. Also, make sure the recovery tank water inlet is not plugged. Tighten the drain plug and clear recovery tank lid. Tighten the vacuum motor, but be careful not to overtighten and damage the motor. Finally, make sure that the batteries are charged.
E
elizabethmckayAug 18, 2025
How to fix poor squeegee pick up on Nobles Floor Machine?
- E
  Elizabeth BrownAug 18, 2025
  To resolve poor squeegee pickup on your Nobles Floor Machine, first, ensure the recovery tank isn't full by emptying it. Then, inspect the ball float shutoff screen inside the recovery tank for clogs and clean as needed. Check the squeegee for any obstructions and clean it. If the squeegee blades are worn, replace them. Tighten the squeegee thumbscrews. Verify the vacuum hose connections are secure and that the hose is free of damage, clearing any debris inside. Replace the tank gasket if it's defective. Ensure the recovery tank water inlet isn't plugged. Tighten both the drain hose plug and the clear recovery tank lid. Make sure the vacuum motor is securely tightened, but avoid overtightening. Lastly, ensure the batteries are adequately charged.
S
Steven WoodAug 27, 2025
What causes poor squeegee pick up on Nobles SS2001E Floor Machine?
- K
  Kathryn MurphyAug 27, 2025
  If you're experiencing poor squeegee pickup with your Nobles Floor Machine, begin by emptying the recovery tank if it's full. After that, inspect the ball float shutoff screen inside the recovery tank for clogs and clean it. Ensure the squeegee is free of debris; clean it if necessary. Replace the squeegee blades if they're worn. Check and tighten the squeegee thumbscrews. Make sure the vacuum hose connections are secure and without holes, and clear any clogs in the hose. Replace the tank gasket if it is defective. Also, ensure the recovery tank water inlet isn't plugged. Tighten the drain hose plug and the clear recovery tank lid. Tighten the vacuum motor, being careful not to overtighten. Finally, check that the batteries are charged.
D
dsmithNov 2, 2025
Why is my Nobles SS2001E squeegee not picking up water?
- S
  Sara DavisNov 2, 2025
  If your Nobles Floor Machine's squeegee isn't picking up water well, several factors could be at play. Start by checking if the recovery tank is full and empty it if necessary. Inspect the ball float shutoff screen inside the recovery tank for clogs and clean it. Also, ensure the squeegee itself isn't clogged with debris; if it is, clean it thoroughly. Check the condition of the squeegee blades and replace them if they appear worn. Make sure the squeegee thumbscrews are tightened properly. Verify that the vacuum hose connections are secure and the hose isn't damaged. Clear any blockages from the vacuum hose. Inspect the tank gasket and replace if defective. Check if the recovery tank water inlet is plugged and remove any debris. Ensure the drain hose plug and clear recovery tank lid are ti...