Why does my Nobles Speedshine 2000 Floor Machine motor not operate?
The motor may not operate due to several reasons: - The machine's circuit breaker might have tripped. If this is the case, determine the cause, reset the breaker on the machine, and wait 15 seconds before restarting. - The building's circuit breaker could have tripped. Try resetting the breaker and switching to a different circuit.
What to do if the Nobles Speedshine 2000 Floor Machine circuit breaker trips continuously?
If the circuit breaker trips continuously, it might be due to a soiled pad. Try replacing the pad. It could also be an improper pad for the application, so change to the proper pad.
How to fix a Nobles Speedshine 2000 Floor Machine pad that spins slowly or not at all?
If the pad spins slowly or not at all, it could be due to a loose drive belt. Try tightening the drive belt. Alternatively, the drive belt might be broken, in which case you should replace it.
Instructions for attaching the burnishing pad to the machine.
Procedure for checking and adjusting drive belt tension monthly.
Procedure for inspecting motor carbon brush wear every 250 hours.
Detailed list and diagram of parts for the handle assembly.
Detailed list and diagram of parts for the base assembly.
General| Brush Speed | 200 RPM |
|---|---|
| Cleaning Path | 20 in |
| Power Source | Corded Electric |
| Operating Width | 20 in |
| Speed | 200 RPM |
To Next Page