Nobles EZ Rider HP Specifications

Nobles | 701 N. Lilac Drive | P.O. Box 1452 | Minneapolis MN 55440-1452 | 800.553.8033 | www.nobles.com | nobles@tennantco.com
Specifications subject to change without notice. REV 8.14.06
Scrubbing System
Cleaning path 28 in / 710 mm 32 in / 810 mm
Solution tank capacity 30 gal / 113 L
Maximum solution flow rate - variable
0-1.0 gpm /3.7 L
Brush quantity & size
(2) 6 in / 150 mm
Brush/Pad pressure
Up to 140 lbs. / 64 kg
Scrub motors
0.75 hp / 0.56 kW
Scrub motor speed
750 rpm
Motor amps
20A
Motor voltage 36V
Recovery System
Recovery tank capacity 45 gal / 170 L
Airflow 75 cfm / 2124 L / min
Water lift 70 in / 1780 mm
Vacuum motor type 3 stage
Vacuum motor hp 0.8 hp / 0.6 kW
Vacuum motor amps 17A
Vacuum motor watts 600
Propelling & Power System
Transport drive system description
Front wheel direct drive
Transport speed forward
0 - 4 mph / 6.4 km / h
Scrubbing speed forward
0 – 3.5 mph / 5.6 km / h
Speed control system reverse
0 - 2 mph / 3.2 km / h
Transport - empty for trailering 11 deg / 19.4 %
Working - scrubbing 4 deg / 7%
Battery amp hour rating
244 A / 36v
Battery description (6)
6 volt
Battery run time per charge
Up to 3 hours
Dimensions / Weight / Sound level
Length
66.5 in / 1690 mm
Body width
32.25 in / 810 mm
Squeegee width 33 in / 840 mm 38.25 in / 970 mm
Height 54 in / 1,370 mm
With batteries 1285 lb / 580 kg
Cleaning Width 28 in / 710 mm 32 in / 810 mm
Sound level 72 dBa
Warranty
2 years/1000 hrs on parts and labor/travel (6 months) (excluding batteries).
10 years on rotationally-molded polyethylene tanks.
EZ Rider
®
HP
cylindrical specifications

Nobles EZ Rider HP Specifications

General

Brand	Nobles
Model	EZ Rider HP
Category	Floor Machine
Language	English