10
FEATURE OVERVIEW
MULTIPLE BATTERY COMPATIBILITY
(GEN2, GEN3 & GEN4)
Independently charges multiple 12V
batteries
WATERPROOF
100% completely sealed, protects against
extreme working environments & rated
at IP68
FULLY INTERACTIVE
Automatically adjusts itself to changing
current needs
DESIGNED FOR SAFETY
Reverse polarity, short circuit, open circuit,
spark proof, overheat, overcurrent &
overcharge protected
HF/HE SWITCH MODE DESIGN
High-frequency, high-efciency for a
lightweight, compact charger
RAPID CHARGING TECHNOLOGY
Charges batteries 2X faster than traditional
linear battery chargers
VARIABLE INPUT COMPENSATED
100% full charge even with varying A/C
input voltages
RECOVERY MODE
Recovers deeply discharged & sulfated
batteries with pulse charging
MULTIPLE BATTERY CHEMISTRY
Safely charges Wet, Gel, MF & AGM
batteries
ABNORMALITY PROTECTION
Automatically shuts “off” if charger remains
in Bulk charge mode for an extended period
of time
SPECIFIC GRAVITY OPTIMIZATION
A stabilizing charge that optimizes the
specic gravity of a battery for increased
performance
IGNITION PROTECTED
Non-igniting and temperature controlled for
safe and worry-free operation
CHARGING TIMES
The time required for the GEN Series to charge a normally discharged
battery is shown below. Deeply discharged batteries may take longer to
charge depending on the depth of discharge (DOD). The charge time is
based on an average depth of discharge to a fully charged battery.
*Note: The above table is for reference purposes only. Actual data may
differ due to battery conditions. The time required to charge a normally
discharged battery is based on an average DOD of 50%.
BATTERY SIZE
(Ah)
APPROXIMATE TIME TO CHARGE*
(Hours)
25
50
60
70
80
90
100
125
150
200
230
1.3
2.5
3.0
3.5
4.0
4.5
5.0
6.3
7.5
10.0
11.5
To Next Page
Loading...
Need help?
General
