Nokia 4G03-A - Carrier Aggregation Information

Nokia FastMile 4G Receiver Product Overview Performance information
Issue: 01 DRAFT 3TG-00386-ABAA-TCZZA 57
DRAFT
• Downlink: DL 3xCA 2x2MIMO 256 QAM
• Uplink: single carrier 64 QAM
• FDD inter-band 3CA
• TDD Band 41 intra-Band 3CA, configuration is configuration 2, subframe 7
• Base Bandwidth 20M
• Data rates can have a margin of 2%
• Packet length is 1470B for UDP
• Window is 1000k for TCP
• Data rates are for IPv4 cases
• Data forwarding working on router model
The end-to-end throughput is achieved in the conductive mode with cable connected.
Ethernet throughput for the Nokia FastMile 4G Receiver is as per standard Ethernet
1000BASE-T, with a maximum of 1000 Mbps. The Ethernet link gets negotiated at
1000 Mbps when a residential gateway or a PoE injector is connected to the Nokia
FastMile 4G Receiver.
12.3 Carrier aggregation information
The following tables provide carrier aggregation support information for the Nokia
FastMile 4G Receiver:
• Compact mono-band and ABA models: Table 12
• Compact multi-band B3/B7/B20/B32 (Model 4G04-A): Table 13
• Compact multi-band B1/B3/B7/B38/B40/B41/B20/B28 (Model 4G05-A): Table 14
Table 12 Carrier aggregation support for the Compact mono-band and
ABA models
Band
Downlink
Carrier aggregation support
B42
3400 MHz-3600 MHz
Up to 40 MHz bandwidth contiguous 2CA
Up to 40 MHz bandwidth non-contiguous 2CA
Up to 60 MHz bandwidth contiguous 3CA
Up to 60 MHz bandwidth non-contiguous 3CA
B43
3600 MHz-3800 MHz
Up to 40 MHz bandwidth contiguous 2CA
Up to 40 MHz bandwidth non-contiguous 2CA
Up to 60 MHz bandwidth contiguous 3CA
Up to 60 MHz bandwidth non-contiguous 3CA
(1 of 2)