Nokia 4G03-A - Using the Nokia Wireless App to Manage a Unit Managed by an ACS

Nokia FastMile 4G Receiver Product Overview Management using the Nokia Wireless app
Issue: 01 DRAFT 3TG-00386-ABAA-TCZZA 81
DRAFT
Press the Reset option if you want to proceed with the reset to factory settings, or press the
Cancel option.
If you pressed the Reset option, press OK.
13.3 Using the Nokia Wireless app to manage a
unit managed by an ACS
If an ACS is being used for remote management of the Nokia FastMile 4G
Receiver (through TR-069), you can use the Nokia Wireless app to perform
management activities on the Nokia FastMile 4G Receiver after it has been
installed, such as viewing information, uploading CA certificates, and rebooting, as
described in the following procedure.
You will need the QR code that was saved as described during installation of the
Nokia FastMile 4G Receiver in order to scan it when logging in to the 4G Receiver