Management using the Nokia Wireless app Nokia FastMile 4G Receiver Product Overview
62 3TG-00386-ABAA-TCZZA Issue: 01 DRAFT
DRAFT
13 Management using the Nokia
Wireless app
13.1 Using the Nokia Wireless app to manage the Nokia FastMile 4G
Receiver
13.2 Using the Nokia Wireless app to manage a unit managed by the Nokia
Altiplano FastMile Controller
13.3 Using the Nokia Wireless app to manage a unit managed by an ACS
13.1 Using the Nokia Wireless app to manage the
Nokia FastMile 4G Receiver
After the Nokia FastMile 4G Receiver has been installed as described in the
installation guide, you can use the Nokia Wireless app to perform management
activities on it, such as viewing information, uploading CA certificates, rebooting the
Nokia FastMile 4G Receiver, or resetting to factory settings.
There are some differences in managing the Nokia FastMile 4G Receiver through
the Nokia Wireless app depending on whether the Nokia FastMile 4G Receiver is
managed remotely by the Nokia Altiplano FastMile Controller (through NETCONF)
or by an ACS (through TR-069):
• if the Nokia Altiplano FastMile Controller is being used for remote management
of the Nokia FastMile 4G Receiver (through NETCONF), see section 13.2
• if an ACS is being used for remote management of the Nokia FastMile 4G
Receiver (through TR-069), see section 13.3
13.2 Using the Nokia Wireless app to manage a unit
managed by the Nokia Altiplano FastMile
Controller
If the Nokia Altiplano FastMile Controller is being used for remote management of
the Nokia FastMile 4G Receiver (through NETCONF), you can use the Nokia
Wireless app to perform management activities on it, such as viewing information,
uploading CA certificates, rebooting the Nokia FastMile 4G Receiver, or resetting
to factory settings, as described in the following procedure.
To Next Page
Loading...
