86 Copyright © 2004 Nokia
• CALLER GROUPS
You can add contacts entries to any of five caller groups, and then assign a unique
ringing tone or graphic to that group. This enables you to identify callers from the
group by their unique ringing tone or graphic. A caller group can be as small as one
person or as large as the contacts list. You can rename caller groups to suit your
preference.
To set the phone to ring only for calls from members of a selected caller group, see
the Alert for option in “Customize a profile” on page 88.
Set caller group options
1 From the menus, select Contacts > Caller groups > Family, VIP, Friends,
Business, or Other and one of the following:
Rename group—Rename the group to your preference.
Group ringing tone—Set the ringing tone for the group.
Group logo—Turn the graphic for the caller group on or off.
Group members—Add or remove members from the caller group.
2 Follow the prompts to set the option according to your preference.
Set up a caller group
1 Recall a name from contacts, and select Details > Options > Caller groups.
2 Select the caller group to which you want to add the name.
Remove a name from a caller group
1 From the menus, select Contacts > Caller groups > Family, VIP, Friends,
Business, or Other > Group members.
2 Scroll to the name that you want to remove, and select Options >
Remove contact.
• SELECT CONTACTS VIEW AND MEMORY
At the start screen, select Contacts > Settings and one of the following:
Memory in use—Select the memory you wish to use. Options are Phone, SIM card,
or Phone and SIM combined. With Phone and SIM selected, when you save a new
contact entry, it is saved to phone memory only. However, when you display the
contact list you can see the entries in both phone memory and the SIM card.
Contacts view—Select the Name list, Name and number, Name only, or Name and
image view.
Memory status—View the amount of phone or SIM memory used and available.
6230.ENv1a_9310059.book Page 86 Monday, March 22, 2004 11:54 AM
To Next Page
Loading...
