Nokia 6233 - Configuring Users in Phoenix; Managing Connections in Phoenix

Configuring users in Phoenix
Steps
1. Start Phoenix service software, and log in.
Figure 15 Phoenix login
If the user ID is already configured, select s/he from the
User name drop-down list, and click OK.
2. To add a new user, or to edit existing ones, click Maintain.
3. To add a new user, click New.
4. Type in the name and initials of the user, and click OK.
The user is added to the user name list.
5. Select the desired user from the
User name drop-down list, and click OK.
Figure 16 New user configured
Managing connections in Phoenix
Context
With the Manage Connections feature you can edit and delete existing connections or create new ones.
Note: After choosing the desired connection, and connecting the phone to a PC for the first time,
allow the PC to install the USB device drivers first. Please note that this may take some time to
complete.
If there are problems after the driver installation, check that the USB connection is active from
the Windows Control Panel. If the problem persists, contact the local PC support.
Steps
1. Start Phoenix , and log in.
2. Choose File→Manage Connections... .
RM-123; RM-145
Service Software Instructions Nokia Customer Care
Issue 1 COMPANY CONFIDENTIAL Page 3 –17
Copyright © 2006 Nokia. All rights reserved.