RJ-104 BTHFM rework jig
RJ-104 is a rework jig used when servicing the BTHFM module. It is
used together with rework stencil ST-37.
RJ-108 Soldering jig
RJ-108 is a soldering jig used for soldering and as a rework jig for the
engine module.
RJ-114 Rework jig
RJ-114 is a rework jig used with ST-41.
RJ-57 Rework jig
RJ-57 is a rework jig used with ST-22.
RJ-93 Rework jig
RJ-93 is used as a rework jig for the engine module.
This stencil takes the front end module (FEM) or power amplifier (PA)
module for spreading the soldering paste to the component. Must be
used together with the ST-40 stencil.
RM-123; RM-145
Service Tools and Service Concepts Nokia Customer Care
Issue 1 COMPANY CONFIDENTIAL Page 4 –9
Copyright © 2006 Nokia. All rights reserved.
To Next Page
Loading...
