ST-40 PA rework stencil
This stencil is to be used together with RJ-93 and covering FEM module.
ST-41 Rework stencil
ST-41 is a rework stencil used with rework jig RJ-114.
ST-44 Rework stencil
ST-44 is a rework stencil used with rework jig RJ-57.
SX-4 Smart card
SX-4 is a BB5 security device used to protect critical features in tuning
and testing.
SX-4 is also needed together with FPS-10 when DCT-4 phones are
flashed.
XCS-4 Modular cable
XCS-4 is a shielded (one specially shielded conductor) modular cable
for flashing and service purposes.
RM-123; RM-145
Nokia Customer Care Service Tools and Service Concepts
Page 4 –12 COMPANY CONFIDENTIAL Issue 1
Copyright © 2006 Nokia. All rights reserved.
To Next Page
Loading...
