Get started
16
Plug and play service
When you switch on your phone for the first time, and the phone is in
the standby mode, you may be asked to get the configuration settings
from your service provider (network service). Confirm or decline the
query. See Connect to serv. support in “Configuration,” p. 72 and
“Configuration settings service,” p. 10.
■ Start up without a SIM card
To start up the phone without the SIM card, accept Start up phone
without SIM card?. Then use those features that do not require the SIM
card.
■ Open the keypad
To open the keypad, slide the phone as shown.
■ Normal operating position
Use the phone only in its normal operating position.
Your device has an internal antenna.
Note: As with any other radio transmitting
device, do not touch the antenna unnecessarily
when the device is switched on. Contact with
the antenna affects call quality and may cause
the device to operate at a higher power level
than otherwise needed. Avoiding contact with
the antenna area when operating the device
optimizes the antenna performance and the
battery life.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
