Call functions
25
■ Options during a voice call
Many of the options that you use during a call are network services. For
availability, contact your network operator or service provider.
Call options are Mute or Unmute, Contacts, Menu, Lock keypad, Record,
Loudspeaker, or Handset.
Network services options are Answer, Reject, Hold or Unhold, New call,
Add to conference, End call, End all calls, and the following:
Send DTMF — to send tone strings
Swap — to switch between the active call and the call on hold
Transfer — to connect a call on hold to an active call and disconnect
yourself
Conference — to make a conference call that allows up to five persons to
take part in a conference call
Private call — to discuss privately in a conference call
Warning: Do not hold the device near your ear when the loudspeaker is
in use, because the volume may be extremely loud.
■ Make a video call
When you make a video call, you send a real-time video to the recipient
of the call. The video image captured by the camera on the back of your
phone is shown to the video call recipient.
To be able to make a video call, you must have a USIM card and be
connected in a WCDMA network. For availability of and subscription to
video call services, contact your network operator or service provider. A
video call can only be made between two parties. The video call can be
made to a compatible phone or an ISDN client. Video calls cannot be
made while another voice, video, or data call is active.
1. To start a video call, enter the phone number in the standby mode, or
select Contacts and a contact.
2. Press and hold the call key, or select Options > Video call.
Starting a video call may take a while. Video call and an outgoing
animation is shown. If the call is not successful (for example, video
To Next Page
Loading...
Need help?
General
Weight and Dimensions
