Call functions
26
calls are not supported by the network, or the receiving device is not
compatible) you are asked if you want to try a normal call or send a
message instead.
Tip: To increase or decrease the volume during a call, press the
volume keys.
The video call is active when you can see two video images and hear
the sound through the loudspeaker. The call recipient may deny the
video sending, in which case you may see a still image or a grey
background graphic. You will hear the sound.
3. To end the call, press the end key.
■ Answer or reject a video call
When a video call arrives, Video Call is displayed.
1. Press the call key to answer the video call. Allow video image to be
sent to caller? is displayed.
If you select Yes, the image being captured by the camera in your
phone is shown to the caller. If you select No, or do nothing, video
sending is not activated, and you hear a sound. A graphic is displayed
on top of the video, indicating that it is not sent. You can enable or
disable video sending at any time during the video call.
2. To end the video call, press the end key.
Even when you deny video sending during a video call, the call is still
charged as a video call. Check the pricing with your network operator or
service provider.
■ Options during a video call
Select Options during a video call for the following options: Set
contrast, Video motion, Switch to voice call, End call, Send DTMF and
Loudspeaker.
■ Video sharing
During an ongoing voice call you can share your live camera view with
the call recipient. To share a video the recipient must have a compatible
To Next Page
Loading...
Need help?
General
Weight and Dimensions
